Skip to content
Hurricane Isaias · Stump grinding, fallen-tree haul-away and debris crews in Pensacola, Gulf Breeze, Pace, Milton & Navarre now.Storm line 850-972-1339Pensacola storm page

Stump Grinding Cost in Jacksonville, FL: What to Expect

Florida’s Stump Masters grinds stumps across Duval County every week, and the number one question we get from Jacksonville homeowners is simple: what’s this going to cost me? Fair question. The answer depends on a few specific things: diameter, depth, access, and what needs to happen after the grind. We’ll break it down here so you walk into the estimate knowing what drives the price.

What Stump Grinding Costs in Jacksonville

If you’re searching for stump grinding cost Jacksonville, here’s the short answer: most residential jobs run between $175 and $550 per stump. The bulk of single-stump jobs land in the $225 to $400 range. Multi-stump jobs almost always come in lower per unit. If we’re already on your property with the equipment running, the fifth stump doesn’t cost what the first one did.

A few variables move the number up or down more than anything else:

  • Diameter at ground level. A 10-inch pine stump grinds out in under fifteen minutes. A 36-inch live oak takes longer, burns through more carbide teeth, and costs more. We measure the widest point at ground level before quoting.
  • Depth of the grind. Standard residential grinding goes 6 to 12 inches below grade. That depth handles most sod installations and general landscaping. If you’re pouring concrete or setting a fence post over the spot, we can go deeper, but deeper means more time and more teeth.
  • Access to the stump. If our crew can pull the commercial Vermeer stump grinder within thirty feet of the stump, the job runs fast. If we’re carrying the machine through a narrow side gate or around a pool cage, that adds time. Tell us the layout when you call, it affects the quote.
  • Root spread. Some stumps, especially older laurel oaks and water oaks common in Duval County, have surface roots that run ten to fifteen feet out from the trunk. Grinding the stump and leaving the roots creates trip hazards and regrowth. We quote root grinding separately but typically handle it the same visit.
  • Chip haul and cleanup. Grinding produces a pile of wood chips. You can keep them for mulch, or we haul them. Chip removal is an add-on, a small one, but it factors into the final number.

Every quote we give is free and written. No ballpark guesses over the phone, no deposit to get started. We size the job on site.

Why Jacksonville Wood Stumps Vary So Much in Price

Jacksonville’s tree canopy is heavy with hardwoods: live oak, laurel oak, water oak, southern red oak. These species leave behind dense, wide stumps with deep root systems. They take longer to grind than pine or palm, which is why wood stump grinding cost Jacksonville tends to run toward the middle and upper end of stump grinding price florida ranges.

Wood density matters. A pine stump of the same diameter as an oak grinds out significantly faster. Carbide teeth, the cutting tools on the grinding wheel, dull faster on hardwood. That wear is real cost, and it shows up in the quote for large hardwood stumps.

Palm stumps are a different story. They’re fibrous, not dense, and they grind quickly. If your stump is a Washingtonia or a cabbage palm, expect pricing on the lower end of the range even for larger diameters. The tradeoff is that palm fiber doesn’t break down the same way. We typically recommend a fuller chip haul when grinding palms.

For wood stump grinding Jacksonville FL, the species on your property matters as much as the size. Tell us what came down and we’ll give you a tighter estimate before we arrive.

Multiple Stumps on the Same Property

If a storm came through or a contractor cleared several trees, you may be looking at four, six, or ten stumps. We price multi-stump jobs as a package. Mobilization, getting the equipment to your property, costs the same whether we grind one stump or eight. Spread that across eight stumps and the per-stump number drops. Call us with a rough count and we’ll give you a written range before we even pull up.

Left by Another Company?

A large portion of our Jacksonville calls come from homeowners whose tree company took the tree but left the stump. That’s common. Tree removal and stump grinding are two different scopes of work, and a lot of tree crews don’t grind. We do. We don’t require you to have used any particular company beforehand. If there’s a stump in your yard, we’ll quote it.

What Happens After the Grind

Grinding the stump is step one. What you’re left with after is a hole, sometimes a big one, filled with chips, loose dirt, and wood debris. That hole doesn’t fix itself. This is where a lot of Jacksonville homeowners get stuck: the stump is gone, but the yard still looks wrecked.

Our crew handles the full sequence: stump grinding, chip haul, grading, and sod. Same crew, same visit when the scope allows. Here’s how that sequence works on a typical job:

  • Grind. We take the stump 6 to 12 inches below grade with the commercial grinder. The grinding wheel cuts the stump and roots into chips.
  • Haul. Chips get loaded out if you’ve opted for chip removal. If you’re keeping them for mulch, we pile them where you want them.
  • Grade. The hole gets filled and leveled. We bring the spot back to grade, meaning flush with the surrounding lawn, so it’s ready for sod or seed.
  • Sod. We cut and lay fresh sod to match your existing lawn. In Jacksonville, that’s usually St. Augustine. Floratam is the most common cultivar in Duval County, though we also work with Bahia and Zoysia depending on what’s already there.

If you only need the grind and you’ll handle the rest, that’s fine. But most homeowners find it easier to let one crew finish the lot rather than scheduling three separate contractors for a ten-square-foot repair.

How to Get an Accurate Jacksonville Stump Grinding Quote

The fastest path to an accurate number is a free written estimate on site. We don’t price stumps blind. What looks like an 18-inch stump in a photo can turn out to be a 28-inch stump with a root plate that spreads well past the fence line. On-site measurement takes ten minutes and removes all the guesswork.

A few things that help us quote faster when you call:

  • Approximate diameter of the stump (measure across the widest point at ground level)
  • Tree species if you know it. Hardwood versus pine versus palm changes the estimate.
  • How many stumps are on the property
  • Access situation: open yard, fenced yard, narrow gate
  • Whether you want chip haul, grading, and sod, or just the grind

You don’t need all of that to call. We’ll ask. But having it ready speeds things up.

Serving Jacksonville and Duval County

We run jacksonville stump grinding jobs across all of Duval County: Jacksonville proper, Jacksonville Beach, Orange Park, Ponte Vedra, and surrounding areas. Our service area covers seven counties total: Duval, Volusia, Flagler, St. Johns, Seminole, Orange, and Clay. If you’re in one of those counties and you have a stump, we cover you.

Stump removal cost Duval County varies by job, but our estimates are free, written, and scoped on site, so you know the full number before any work starts. Jacksonville jobs typically schedule within a few business days. Large multi-stump jobs or jobs that include grading and sod may need a separate grading visit, but we’ll tell you that upfront when we write the estimate. No surprises on scope or scheduling.

We’re fully insured and licensed. Our stump grinder Jacksonville crews run commercial-grade Vermeer equipment built for Florida hardwoods. We’re not showing up with a rented unit. This is what our crew does.

Ready to get the stump gone and the yard back to grade? Call us at (386) 248-5486 for a free written estimate. We’ll come out, measure the stump, and hand you a written quote covering the full scope: grind, haul, grade, and sod. You’ll know exactly what recovery looks like on your property before any work starts.

script>
Scroll to Top