Florida’s Stump Masters gets calls from Daytona Beach homeowners every week asking the same question: what’s it going to cost to grind this stump? The short answer is $175 to $550 per stump for most residential jobs, with the bulk landing in the $250-$400 range. The longer answer depends on four things: diameter, depth, access, and what you want done with the mess afterward. Here’s how we size every job and what you’re paying for when we pull up in the truck.
What Drives the Price of Stump Grinding in Daytona Beach
Diameter is the biggest variable. A 10-inch water oak grinds out in under an hour. A 36-inch live oak is a different morning entirely, more passes, more carbide teeth worn down, more chip volume to haul. Every inch of diameter adds time, and time is what you’re paying for when you hire a crew with a commercial stump grinder.
Depth matters just as much. We grind 6-12 inches below grade on every job. That’s not optional. It’s what lets you lay sod or seed over the spot without a hump forming two rainy seasons from now. Some companies skim the top and call it done. We don’t. Going below grade takes longer, especially on stumps with wide lateral roots, but it’s the only way the finished yard holds flat.
Access is the third lever. If our crew can pull the commercial Vermeer stump grinder within thirty feet of the stump, the job moves quick. If we’re threading the machine through a side gate or navigating around a concrete patio, that adds time and sometimes equipment changes. Tight access on a big stump is the scenario most likely to push your job toward the higher end of the range.
The fourth factor is what comes after the grind. Wood chip removal and haul-off is an add-on that most homeowners want. A ground-up stump leaves a pile of chips roughly the size of a small car. Grading the hole flat, filling low spots with clean fill, and laying fresh St. Augustine or Bahia sod over the area all add to the ticket. We offer all of it, same crew, same visit, so you’re not coordinating three separate contractors after we leave.
Typical Price Ranges by Stump Size
We don’t publish a flat rate because every stump is sized on site. That said, here’s a realistic range for the stumps we see most often. If you’ve been searching stump grinding near me daytona beach or trying to nail down a stump grinding price volusia county, this should give you a solid working number before we even come out:
- Under 12 inches diameter: $175-$250. Small palms, crepe myrtles, young oaks. Fast work, low chip volume.
- 12-24 inches diameter: $250-$375. Most residential stumps land here, mid-size oaks, pines, sweet gums. This is the common range.
- 24-36 inches diameter: $375-$475. Larger oaks, big pines, anything with heavy lateral roots. Takes most of a morning.
- Over 36 inches diameter: $475-$550 and up. Old-growth oaks, large laurel oaks. Full grind below grade on these is a serious machine day.
Multiple stumps on one lot usually drop the per-stump price. We’re already there, the truck is already staged, and grinding five stumps in a row is more efficient than making five separate trips. If you’ve got three or more, tell us upfront when you call.
What the Quote Covers, and What It Doesn’t
Every stump grinding estimate florida we provide is free and written. Nothing verbal, nothing approximate. A written scope with a line-item breakdown so you know exactly what’s included before we start the grinder.
The base grind price covers grinding the stump to 6-12 inches below grade and leaving the site. That’s it. Chip haul, grading, and sod are separate line items. Here’s why we break it out that way: some customers want to use the wood chips in a garden bed and don’t need haul-off. Some are doing their own fill and sod. Breaking it out lets you pay for exactly what you need, not a bundle that includes services you’ll handle yourself.
Chip Haul and Disposal
If you want the chips gone, we load them and haul them off the same day. This runs $75-$150 depending on volume. A 20-inch stump generates more chips than most people expect, a full wheelbarrow or two just from the above-grade material, more from the below-grade grinding. If you want the chips left on site, we’ll mound them somewhere out of the way at no extra charge.
Grading and Sod Replacement
After the grind, you’ve got a hole. On a 20-inch stump ground 10 inches deep, that hole is real, maybe eight cubic feet of void once you remove the chip pile. We fill it, tamp it, and grade it back to the surrounding lawn level. Then, if you want it sodded, we cut and lay St. Augustine, Bahia, or Zoysia to match what’s already growing. Same crew, same visit. Volusia County soil holds sod well when it’s installed right after grading. Don’t let the hole sit open through a wet season.
Why Daytona Beach Stumps Have Their Own Quirks
Coastal Volusia County has soil conditions that affect every stump job. Sand-heavy soil grinds clean but doesn’t hold fill well without tamping. Stumps near the beach corridor, Daytona Beach Shores, Port Orange, Ormond Beach, sometimes sit in soil with shell fragments and historic fill that throws off grinding speed. We’ve worked this ground long enough to know where the surprises come from.
Live oaks are everywhere in this part of Florida, and they’re the stump that gives crews the most trouble. The lateral root system on a mature live oak can extend eight to ten feet from the trunk base. We grind the stump and the visible surface roots, roots that have heaved the lawn, lifted concrete, or run along the surface. What’s underground stays underground unless you specify a full root-zone grind, which is a larger job and priced accordingly.
Palms are different. A sabal palm stump doesn’t have a traditional wood grain. It’s fibrous, stringy, and harder on carbide teeth than a same-size oak. That’s reflected in how we price palm stumps. They’re not always cheaper just because the tree was smaller.
How to Get an Accurate Quote
The fastest way is to call us at (386) 248-5486. Give us the count of stumps, the rough diameter of each, and your address. We’ll tell you if we need a site visit or if we can scope it from photos. Most jobs get a written estimate within 24 hours of contact. Whether you need stump removal daytona beach or wood stump grinding daytona beach on a single lot, the process is the same.
When you call, have these details ready:
- Number of stumps and approximate diameter (measure at ground level, not the tree that used to be there)
- Species if you know it, oak, pine, palm, crepe myrtle all grind differently
- Access situation, gate width, distance from street, anything overhead like power lines or a porch overhang
- What you want after the grind, chips hauled, grading done, sod laid, or some combination
We serve Daytona Beach and all of Volusia County, plus Flagler, St. Johns, Seminole, Orange, Duval, and Clay counties. Our stump grinding crews run six days a week. Most residential jobs schedule within a week of the estimate, faster in the slower winter months. And if you’ve been searching Wood stump grinding cost daytona beach and want a number before you call, the ranges above are as close as we can get you without seeing the stump in person.
The tree is already gone. The stump is what’s left, and it’s what we deal with every day. Grind it, haul it, grade it, sod it. Call (386) 248-5486 for a free written estimate on your stump grinding cost daytona beach job, and we’ll put your yard back to grade.
