Florida’s Stump Masters gets this question every week: what does it cost to remove a small stump? Short answer, small stumps are the most affordable grinds we do, usually landing between $175 and $275 depending on a few job-specific factors. But “small” means different things to different people, and the price can shift based on what’s around the stump, how deep we grind, and whether you want chip haul and grading after. This article breaks it down so you’re not guessing before you call.
What Counts as a Small Stump?
In our trade, stump size is measured by diameter at ground level, the width of the cut face left behind after the tree came down. Most crews consider anything under 12 inches a small stump. That covers ornamental trees, crape myrtles, palms under 10 inches, small water oaks, and the kind of stuff that ends up in side yards and flower beds.
Twelve inches and under grinds fast. Our commercial Vermeer chews through a 10-inch pine or a crape myrtle base in under 20 minutes once we’re set up. The carbide teeth do the work, we’re just controlling depth and making sure we hit 6 to 8 inches below grade on the first pass.
Palm stumps are a slight exception. Palms don’t have lateral roots the way hardwoods do, so root spread is less of a concern. But the fibrous trunk material can be grabby on the cutterhead, and some palms push back in unexpected ways. We price them in the same range as other small stumps, $175 to $275, and factor that in during the estimate.
What Drives the Price Up or Down
Diameter is the starting point. Everything else adjusts from there.
- Access. If our truck can pull within 30 feet of the stump, setup is fast and the quote stays low. If we’re threading the grinder through a narrow gate, hauling it across soft lawn, or working around an irrigation head someone forgot to mark, that adds time. Time adds cost.
- Root spread. Small stumps can still have aggressive root systems. Laurel oaks and water oaks are the classic example in northeast Florida. We grind what’s visible plus the surface roots that would pop up later. A stump with heavy root flare takes longer than the diameter alone suggests.
- Depth required. Standard residential grinding goes 6 to 12 inches below grade. If you’re putting new sod over the spot, 8 inches clears most root mass. If you’re pouring a pad or setting a fence post, we go deeper. Deeper grinds take longer and dull more teeth. We price accordingly.
- Quantity. One small stump at $175 is a service call. Five small stumps on the same visit is a different conversation. The per-stump number drops when we’re already set up and moving. Multi-stump jobs almost always cost less per unit than single-stump calls.
- Chip removal. Grinding produces a pile of woody mulch. Some customers want it left to fill the void. Others want it gone. We haul chips with our skid steer. Chip haul is a separate line item, and it’s worth including if you’re planning to lay sod replacement or reseed the area.
The Full Recovery Picture: Grind, Haul, Grade, Sod
A lot of customers call about stump grinding and don’t realize how much of the yard work can get done in the same visit. The grind is the starting point. What comes after is what actually finishes the lot.
Here’s the typical sequence we run on a post-removal recovery job:
- Grind. We take the stump down 6 to 12 inches below grade with the commercial Vermeer. The cutterhead works in passes until we’re at depth. What’s left is a mix of wood chips and disturbed soil in a shallow basin.
- Haul. We remove the chip pile with the skid steer if you want a clean surface. Some customers keep the chips for mulch beds, your call. If sod is going in, we haul and top-dress the void with clean fill so it sits level.
- Grade. The spot where the stump sat is usually lower than the surrounding grade by the time we’re done grinding. We level it, either pulling topsoil from on-site or bringing fill, so the new surface ties in flat. Water has to sheet off, not pool.
- Sod. We cut and lay fresh St. Augustine, Bahia, or Zoysia to match whatever you’re running in the yard. Same crew, same visit. No second trip, no third contractor call.
For a small stump with chip haul, grading, and a few square feet of St. Augustine, you’re typically looking at $325 to $500 total. That’s the all-in number, grind to sod, on a straightforward job. Tougher access or a heavier root system moves it up. A tight, easy job with good truck access can come in at the low end.
Why Florida Conditions Matter
Florida’s soil and climate create a few wrinkles that affect stump grinding cost florida homeowners don’t always anticipate.
The first is root aggression. Volusia County and the surrounding counties are full of water oaks, laurel oaks, and camphor trees with lateral roots that push 10 to 15 feet from the trunk. Even a small-diameter stump can have roots running under the slab, lifting the driveway edge, or weaving through irrigation lines. We map those before we grind. Damage to an irrigation line mid-job is nobody’s good day.
The second is soil type. Sandy Florida soils drain well but don’t hold shape the way clay does. The void left by grinding in sandy soil wants to settle. Grind and leave, and you’ll see a depression in two or three months after rain cycles. Proper grading and fill, not just chips, keeps the surface stable long enough for sod to root in.
The third is regrowth. Certain species common in stump grinding northeast florida jobs will push new growth from the root system if you don’t grind deep enough. Crape myrtles especially. We grind to depth the first time so you’re not calling us back six months later for a re-grind on the same stump.
How We Price It and What Comes Next
Every quote from us is free and written. We don’t give ballpark numbers over the phone for stump jobs. Diameter, access, depth, and root spread all have to be eyeballed on site before we can hand you a firm number. What we can tell you is that the small stump removal cost florida homeowners typically see runs $175 to $275 for grinding alone. The small stump grinding price for a full recovery package, grind, haul, grade, sod, runs $325 to $500 on a typical job.
We work across seven counties: Volusia, Flagler, St. Johns, Seminole, Orange, Duval, and Clay. If you’re searching for stump removal near me florida and you’re in that footprint, we can get a crew out to size the job and hand you a written number with no deposit and no pressure. That stump sitting in your yard from a tree that came down last season, or last decade, we handle both.
What to Have Ready When You Call
You don’t need to measure anything before you call. But if you can tell us roughly how wide the cut face is, whether there’s a gate or fence we’d need to pass through, and what you want to do with the spot after, grass, mulch, concrete, we can give you a faster, more accurate quote on the visit. A photo of the stump texted ahead of time also helps.
One Visit Is Usually All It Takes
On most small stump jobs, we arrive, size the work, confirm the written quote, and grind the same day. Chip haul and grading go in sequence while we’re already set up. If sod is part of the scope, we either cut it same visit or schedule the sod drop for a day or two out when the base has been confirmed level. Either way, you’re not managing three separate contractors or three separate schedules.
Small stumps are quick work when the access is clean and the root system is manageable. Get us out to look at it, and we’ll tell you exactly what we’re dealing with. Call (386) 248-5486 for a free written estimate, no deposit, no guesswork, just a number you can plan around.
