Skip to content
Hurricane Isaias · Stump grinding, fallen-tree haul-away and debris crews in Pensacola, Gulf Breeze, Pace, Milton & Navarre now.Storm line 850-972-1339Pensacola storm page

How to Get Rid of Wood Chips After Stump Grinding

Florida’s Stump Masters gets this question on almost every job. The tree is gone, the stump grinder finishes its last pass, and you’re left staring at a mound of wood chips where a tree used to stand. What do you do with all of it? The short answer: we haul it out, fill the void, grade the surface, and lay sod, same crew, same visit. But let’s back up and give you the full picture, because how you handle the chips matters more than most people realize.

What Stump Grinding Actually Leaves Behind

A commercial stump grinder doesn’t make the wood disappear. It shreds it. Our Vermeer grinder works 6 to 12 inches below grade, that means the carbide teeth cut down past ground level, not just flush with it. By the time the grinder lifts off, you’ve got a cone-shaped pile of chips and shredded root material sitting in and around a hole that’s roughly the footprint of the stump, only deeper.

On a mid-sized live oak, say, 20 inches in diameter, that pile can run two to four cubic yards. On a larger laurel oak or water oak, more. The chips are loose, moist from the heartwood, and full of air pockets. They compress over time. If you just shovel them back into the hole and walk away, you’ll have a low spot in six months, sometimes sooner in Florida’s sandy soil.

That’s why chip removal isn’t optional if you want the lot finished correctly. It’s the first step in putting the yard back together.

Your Three Real Options for Wood Chip Disposal

There’s more than one way to handle the chips. Here’s what actually works, and what the tradeoffs are.

Option 1: Haul Them Off

This is what most homeowners want. We load the chips, haul the load, and the spot is clear for fill, grading, and sod. Our crew uses a skid steer for volume jobs, faster than shoveling, cleaner result. If access is tight, we work with wheelbarrows and a truck-mounted bin. Either way, the chips leave the property. You don’t have to find somewhere to put them. You don’t have to rent equipment. The wood chip removal is factored into the estimate we give you before we start.

Chip haul is the right call when your end goal is a restored lawn, St. Augustine, Bahia, or Zoysia going in where the stump was. You can’t lay sod over a loose chip pile and expect it to root. The ground has to be solid and at grade.

Option 2: Keep the Chips for Mulch

Fresh stump grindings make decent mulch. They break down faster than bark mulch, which means they need topping off sooner, but for garden beds and around trees, they work. If you want to keep a portion, say so before we start grinding. We can pile the chips in a designated spot on your property instead of loading them out.

A few things to know: fresh grindings from diseased trees shouldn’t go back near healthy plants. Root rot and fungal issues can carry in the chips. If the tree came down because of disease, we’ll tell you, and in that case, haul-off is the cleaner move. Also, pine chips and oak chips behave differently as mulch. Pine breaks down faster and can affect soil pH in planting beds. We’re not arborists, but we know what we’ve ground, and we’ll flag it.

Option 3: Mix Chips Into Fill, And Why We Don’t Do It

Some companies grind the stump, push the chips back into the hole, throw a little dirt on top, and call the job done. You’ll see this on lower-priced quotes. It looks fine for a week. Then the chips start to decompose, the pile settles, and you’ve got a sunken patch in your yard. In Florida’s heat and humidity, that decomposition moves fast, faster than you’d expect.

We don’t back-fill with raw chips alone. If we’re filling the void and finishing the spot, we use a chip-and-fill mix or clean fill depending on what the grade calls for. That’s the difference between a surface that holds and one that sinks.

What Happens After the Chips Are Gone

Chip removal is the first step, not the last. Once the hole is clear, the real finish work starts, and this is where a lot of homeowners get stuck when they’ve used a company that only grinds and leaves.

Here’s the sequence our crew runs:

  • Grind, 6 to 12 inches below grade, full stump and major surface roots
  • Haul, chips and debris off the property or relocated per your request
  • Grade, fill the void, level the surface to match the surrounding lawn elevation
  • Sod, install the right grass variety to match what’s already growing

That four-step sequence, grind, haul, grade, sod, is how you actually finish the lot. Most homeowners in Volusia County and across our service area have dealt with the situation where a tree crew grinds the stump and leaves a chip pile. Then they’re on the phone with a landscaper. Then they need someone for the grading. Three calls, three crews, three scheduling windows. We run it as one job.

The sod match matters. If your lawn is St. Augustine, we’re not laying Bahia over the patch, it’ll stand out and it won’t knit into the surrounding turf the same way. We look at what’s growing before we order material. If you’ve got a mix, we’ll talk through it before any sod goes down.

Chip Volume, Access, and What Affects the Estimate

The cost of chip removal isn’t a flat number. It depends on how many stumps we’re grinding, how big they are, and how easy it is to get equipment to the site. Here’s what moves the number:

  • Stump diameter, a 36-inch water oak generates significantly more chip volume than a 14-inch ornamental. More chips means more load time and more truck trips.
  • Number of stumps, multiple stumps on one job run more efficiently. One mobilization, one haul.
  • Access, if we can pull the skid steer to within thirty feet of the pile, loading is fast. A narrow side gate or a soft-ground backyard slows things down and may shift how we haul.
  • What you want done after, chip haul only is simpler than chip haul plus fill plus grading plus sod. We price what you actually need, not a package that bundles in services you don’t want.

Most residential stump grinding jobs, grinding plus chip haul, land between $175 and $550 per stump. Grading and sod add to that based on the square footage of the affected area. Every quote is written, free, and sized on site. We don’t estimate off photos or Google Maps satellite views, the stump tells you things a photo doesn’t.

Ready to Clear the Chips and Finish the Spot?

If you’ve got a stump, a chip pile, or a bare patch where a tree used to stand, we can put it back together. Our crew handles the grind, the chip haul, the fill, the grading, and the sod, fully licensed and insured, working across seven counties in northeast and Central Florida.

Call us at (386) 248-5486 for a free written estimate. We’ll come out, look at the stump and the site, and give you a number before any work starts. No deposit required to get the quote. If the job makes sense, we’ll get it on the schedule.

script>
Scroll to Top