Florida’s Stump Masters gets this question a few times a week, and it makes sense. A 36-inch stump is not a small job, and nobody wants to call three contractors before they get a straight answer. Here it is: the cost to grind a 3 foot stump in northeast Florida typically runs $350 to $600, depending on species, access, and how deep the grind needs to go. That range is honest. Some 36-inch stumps come in under $400. A few push past $550. We size every job on site and give you a free written estimate before any work starts.
Why Diameter Drives the Price
If you want to understand stump grinding price by diameter, start here. A 36-inch stump has roughly nine times the surface area of a 12-inch stump. That means more passes with the grinder, more carbide teeth wearing down, and more time on the clock. Our commercial Vermeer stump grinder chews through hardwood efficiently, but a 3-foot laurel oak or water oak still takes a full working hour or more to grind 6 to 12 inches below grade. That is where we need to go so the root crown does not push back up and so the filled hole holds sod.
Species matters too. Pine grinds faster than oak. Palms are fibrous and dull teeth quicker than most people expect. If you have a 3-foot sabal palm stump versus a 3-foot live oak, the oak will almost always run higher. We factor all of this into the written estimate, not after the fact.
What Access Does to the Final Number
Access is the second biggest variable. If our crew can pull the truck and grinder within thirty feet of the stump, the job moves at full speed. If the stump is behind a fence line, at the back of a narrow lot, or up against a structure, we may need to carry the grinder through a side gate or reposition multiple times. That adds time, and time adds cost.
Here is what good access looks like from our side:
- A gate opening at least 36 inches wide for the grinder to pass through
- No underground utilities directly under or beside the stump. We need a digger locates call before we go deep
- Ground that is dry enough to run equipment without tearing up the lawn getting there
- No buried irrigation heads within a foot of the stump base
If access is tight but manageable, we note it on the estimate and you see the number before we start. No surprises on the invoice.
What the Price Includes, and What Costs Extra
Standard Grind
The base price on a 3-foot stump covers the grind itself, down to 6 to 12 inches below grade using our commercial Vermeer with fresh carbide teeth. It includes leveling the chips back into the hole so the surface is roughly flush. That is the minimum, and it is what most quotes you see online are built around.
Chip Haul
Grinding a 36-inch stump produces a significant volume of wood chips, easily a pickup-truck load or more. Some customers want those chips spread around the yard as mulch. Others want them gone. Wood chip removal is an add-on, and it is worth asking about when you schedule the estimate. We load and haul the material off site. Most customers with a 3-foot stump add chip removal. The volume alone makes it worth it.
Grading and Sod
After the chips are out, you have a hole. A 3-foot stump leaves a depression roughly 3 feet across and a foot deep after backfill settles. If you want the lot finished, not just ground but back to grade and growing, we do that in the same visit. We bring in fill, tamp it level, and lay sod replacement matched to what is already in your yard. St. Augustine, Bahia, Zoysia, we stock the common cultivars used in northeast Florida. Grading and sod are priced separately from the grind, but we do all of it on the same ticket with the same crew.
Multiple Stumps on the Same Property
If you have more than one stump, the per-stump cost usually drops. The reason is simple: the truck is already there, the crew is already set up, and mobilization is the fixed cost that gets spread across more work. A property with three or four stumps of varying sizes will almost always come in lower per stump than if each one was its own separate job.
We see this a lot after storms or after a large tree-removal project where the cutting crew left multiple stumps behind at different grades. We can quote the whole lot at once and give you one written number covering every stump, chip haul, grading, and sod, all in one visit.
How to Get an Accurate Number for Your Stump
Searching ‘how much does stump grinding cost‘ or ‘How much does it cost to grind a 3 ft stump?‘ will get you a ballpark. It will not match your specific stump until someone looks at it. Two 36-inch stumps on the same street can quote differently based on species, how high the stump sits above grade, how close it is to a fence or structure, and what the customer wants done after.
Here is how the estimate process works with us:
- You call or contact us. We cover Volusia County and six neighboring counties for stump grinding northeast florida
- We schedule a site visit, usually within a day or two
- Our crew measures the stump at the widest point, checks access, and notes any underground utility flags
- You get a written estimate on the spot. No verbal ballpark, no follow-up email three days later
- The estimate covers the grind, and we can add chip haul, grading, and sod to the same document if you want the full job quoted
There is no deposit to schedule the estimate. If the number works for you, we book the grind. If it does not, you walk away with no obligation.
A large portion of the jobs we take are cleanup work after a tree service removed the tree and left the stump at grade. That is a completely normal starting point. The tree is already gone. We finish the spot: grind, haul, grade, sod. One crew, one visit, yard back to where it was.
For a free written estimate on your 36 inch stump removal price, or any size stump in Volusia, Flagler, St. Johns, Seminole, Orange, Duval, or Clay County, call us at (386) 248-5486. Questions about stump grinding cost florida in your area? We will size the job on site and hand you a written number before the grinder starts.
