Skip to content
Hurricane Isaias · Stump grinding, fallen-tree haul-away and debris crews in Pensacola, Gulf Breeze, Pace, Milton & Navarre now.Storm line 850-972-1339Pensacola storm page

Average Cost to Grind a Tree Stump in Northeast Florida

Florida’s Stump Masters gets this question on almost every estimate call: What is the average price to grind a tree stump? The honest answer is $175 to $550 for most residential stumps, with the bulk of jobs landing in the $250-$400 range. That spread is real, not a hedge. A 10-inch pine stump with open truck access grinds out in under an hour. A 36-inch live oak wedged against a fence, with surface roots spreading six feet in every direction, is a different job entirely. Below, we break down every factor that moves the number so you know what to expect before we arrive.

What Drives Stump Grinding Cost

Three variables do most of the work: diameter, depth, and access. Everything else, root spread, wood hardness, how many stumps are on the lot, layers on top of those three.

Diameter

Most grinders price per inch of diameter, measured at ground level. A 12-inch stump might run $175-$225. A 24-inch stump climbs to $275-$375. A 36-inch or larger stump pushes past $400 in most cases. The reason is simple: more diameter means more passes with the carbide teeth, more machine time, and more chips to haul. A wide stump also tends to have a wider root flare, which adds grinding surface below the visible cut.

Depth

Standard residential grinding goes 6-12 inches below grade. That depth gets the stump low enough that you can fill, grade, and lay sod over it without a hump showing up six months later. If the original tree service only cut the trunk flush with the ground, the remaining root ball can be dense and hard. Getting the grinder down to true below-grade depth takes more time than cutting into fresh-cut wood. Some customers ask for shallower grinds, say 4 inches, to save money. We note that in the estimate, but we’ll also tell you straight: it’s likely to cause a problem when you try to sod or replant.

Access

If our crew can drive the truck within 30 feet of the stump, the job moves fast. If the stump is behind a 36-inch gate, we’re carrying or dragging equipment, and that adds time. Soft ground after rain can slow things down too. A commercial stump grinder is heavy, and we won’t tear up your yard to reach the stump if the ground won’t support the load. Those situations get noted on the estimate and priced accordingly.

Multi-Stump Jobs and Per-Stump Pricing

Single stumps are straightforward. Multi-stump jobs get more efficient once the truck is on site and the grinder is running. Most customers with three or more stumps see a lower stump grinder cost per stump than if each were priced individually. Not a dramatic discount, but the mobilization cost spreads out. The count and layout both matter if your stumps are spread across different parts of the yard.

Common scenarios we see across Volusia County and the surrounding counties:

  • One medium pine stump, open access: $175-$250
  • One large oak stump, moderate access: $300-$450
  • Three mixed stumps, same yard: $450-$750 total, depending on size and layout
  • Five or more stumps after a land clearing: Priced as a package, call for a written estimate

These are ranges. The written estimate we put in your hand after a site visit is the number that matters.

What’s Included, and What Costs Extra

This is where a lot of quotes fall apart. One company quotes you $200 to grind a stump. You say yes. They grind it, leave a pile of chips, and drive away. Now you have a hole in your yard filled with loose mulch, no fill dirt, no grade, no sod. The stump is gone but the yard isn’t finished.

When we price a job, the estimate spells out exactly what’s included. Here’s how we break it down:

  • Grinding: Below-grade removal of the stump to 6-12 inches, using a commercial Vermeer stump grinder with carbide teeth
  • Chip haul: We load and remove the wood chips from the site. This is not always automatic, so confirm it’s in your quote
  • Fill and grade: The hole gets backfilled and brought back to grade so the surface is level
  • Sod: If the bare patch needs new grass, we cut and lay St. Augustine, Bahia, or Zoysia depending on what’s already in your yard

Chip haul, grading, and sod replacement are separate line items, not always rolled into a base grind price. We do all four in one visit, same crew, so you’re not calling three different companies to finish the lot. But the estimate shows each piece so you can see exactly what you’re paying for.

Florida-Specific Factors That Affect Price

If you’re researching stump grinding cost florida and finding numbers that don’t match what local contractors quote you, there’s a reason. Northeast Florida has its own variables that shift pricing compared to other states or regions.

Tree Species

Live oak is the most common problem stump in this part of Florida. The wood is dense, the root flare is wide, and the roots spread far. It grinds slower than pine or palm and dulls carbide teeth faster, which means more time on site. Laurel oak is similar. Pine stumps are softer and faster. Palms are a different animal. The root ball on a removed palm is typically less dense, but the stump itself can be fibrous and inconsistent. We price based on what we see, not a species assumption.

Sandy Soil and Root Depth

Florida’s sandy soil lets roots run deep and wide. Surface roots can extend well past the stump’s canopy line and show up as ridges in the lawn. If you want those ground down too, that adds to the scope. We note it in the estimate.

Existing Irrigation Lines

A lot of Northeast Florida yards have in-ground irrigation. Before we grind, we ask about line locations. If the stump sits over a zone line, we work around it. Hitting a line during grinding isn’t always avoidable, but we take reasonable care and tell you upfront if the risk is higher in a given spot.

How to Get an Accurate Price

Online calculators give you a starting point. This article gives you a framework. But the number that applies to your yard comes from a site visit. The average cost to grind a tree stump on your property depends on diameter, depth, access, chip haul, and any additional work like grading or sod. Wondering how much does stump grinding cost for your specific situation? That’s exactly what a site visit answers. We write it down, hand it to you, and you decide. No deposit required to get the estimate.

A few things you can do before we arrive to speed up the process:

  • Know the approximate diameter of each stump. A tape measure across the widest point works fine
  • Mark or point out any surface roots you want ground down, not just the main stump
  • Tell us if there are irrigation lines, buried utilities, or anything else near the stump
  • Know what grass type is in your yard if you’re considering sod. St. Augustine, Bahia, and Zoysia all behave differently after installation

For stump grinding northeast florida, we cover seven counties: Volusia, Flagler, St. Johns, Seminole, Orange, Duval, and Clay. The stump removal price you get from us is written, itemized, and good before we touch anything. Most jobs get scheduled within the week. Grind it, haul it, grade it, sod it, same crew, same visit. Call us at (386) 248-5486 to set up your free written estimate.

script>
Scroll to Top